JL Audio 300/4v3 300W RMS 4-Channel Class-A/B Car Stereo Full Range Amplifier
JL Audio 300/4v3 300W RMS 4-Channel Class-A/B Car Stereo Full Range Amplifier
JL Audio 300/4v3 300W RMS 4-Channel Class-A/B Car Stereo Full Range Amplifier

JL Audio 300/4v3 300W RMS 4-Channel Class-A/B Car Stereo Full Range Amplifier

Regular price $775.19
/
Shipping calculated at checkout.

BRAND NEW

JL AUDIO 300/4V3

Slash V3 Series 300 Watts RMS Power 4 Channel Class AB Stereo Car Audio Full Range Amplifier

Key Features:

  • Slash v3 Series 4-Channel A/B Full-Range Amplifier
  • RMS Power Ratings Channel (11V-14.5V):
  •    - 4 ohms: 75 watts x 4 chan.
  •    - 3 ohms: 75 watts x 4 chan.
  •    - 2 ohms: 75 watts x 4 chan.
  •    - 1.5 ohms: 75 watts x 4 chan.
  • Bridged RMS Power Rating (11V-14.5V):
  •    - Bridged, 3 ohms: 150 watts x 2 chan.
  •    - Bridged, 4 ohms: 150 watts x 2 chan.
  •    - Bridged, 6 ohms: 150 watts x 2 chan.
  •    - Bridged, 8 ohms: 150 watts x 2 chan.
  • Absolute Symmetry Class A/B Circuit
  • R.I.P.S. - Regulated, Intelligent Power Supply
  • Pulse width modulation-regulated switching power supply
  • Dual N-Channel MOSFET power supply
  • H-Bridge amplifier topology
  • Powder-coated cast alloy heat sinks
  • LED power/thermal/low-impedance indicators
  • Differential-balanced input type with RCA jack inputs
  • Advanced Rollback Protection monitors the amp's thermal condition
  • 4/3/2 Channel Operation
  • Selectable 2Ch/4Ch Input Mode
  • Speaker level inputs via RCA, JL Audio XD-CLRAIC2-SW required
  • Input sensitivity:
  •    - Low level: 200mV-2V
  •    - High level: 800mV-8V
  • State-variable, 12 dB/octave Butterworth or 24 dB/octave Linkwitz-Riley LPF or HPF
  • Selectable frequency multiplier: x1/x10
  • Variable crossover filter (x1): 50 - 500 Hz
  • Variable crossover filter (x10): 500 - 5000 Hz
  • Slew Rate: ± 25V/μs
  • Signal to Noise Ration: >108.5 dB
  • Frequency response: 5 - 30,000 Hz (+0, -1 dB)
  • Total Harmonic Distortion: <0.03% @ 4Ω , 20 - 20 kHz
  • Damping Factor: >200 @ 4Ω/50 Hz, >100 @ 2Ω/50 Hz
  • Inline 40A x 1 ANL or MaxiFuse Recommended
  • 4-8 AWG +/- & 8-18 AWG 12V Rem terminals
  • Dimensions: 13.4"L x 9.25"W x 2.36"H
  • Weight: 14lbs / 224oz