Best selling products

• Fits Harley Davidson TWIN-COOLED™ Touring Models
• Lower vented fairing with grille for 6-1/2 in to 6-3/4 in Speaker
• Made of ABS plastic with metal grille
• Includes left and right pod with hardware
• Sold in pairs
• Package Dimensions: Approx. 15 x 8 x 8 Inches
• Weight: Approx. 3lbs

• Fits TWIN-COOLED Touring Models 2014-2018
• Electra Glide Ultra Limited (FLHTK)
• Electra Glide Ultra Limited Shrine (FLHTK SHRINE)
• Electra Glide Ultra Limited Low (FLHTKL)
• Road Glide Ultra (FLTRU)

• Allows you to install a double-DIN radio in your Ford Focus (also requires the Maestro ADS-MRR module)
• Includes dash kit, wiring harness, and other wiring
• Retains steering wheel controls and backup camera with any car stereo
• Extra features with an iDatalink-compatible radio
• SYNC (including USB port, Aux input, and Bluetooth)
• Climate control display on touchscreen
• Visual park assist, tire pressure display, voltage display, and more
• Package Dimensions: Approx. 16 x 15 x 4.4 Inches
• Weight: 5lbs

BRAND NEW

METRA 95-9701

Double DIN Radio Installation Kit for Harley-Davidson 2014-Up Motorcycles

Key Features:
 

• ISO DDIN radio provision
• Designed for models without a radio option
• This kit can only be used with an ISO DDIN radio that has an “L” shaped chassis design, with the radio chassis at the top of the screen
• At present only the Sony XAV-AX100, XAV-AX200, and XAV-AX5000 radios have this design
• For models with a radio option use part 95-9700
• Dimensions: Approx. 15 x 8 x 2 Inches
• Weight: 1 Lb

• Street Glide 2014-up
• Electra Glide 2014-up
• Ultra 2014-up
• Limited models 2014-up
• Road Glide 2015-up

• 6" Mid-Bass Component Speaker
• Maximum Power: 125 Watts
• Continuous Power: 25 Watts
• Voice Coil: Kapton 38.5mm
• Frequency Response: 81Hz - 10kHz
• Sensitivity (SPL 1W/1M): 91dB
• Impedance: 4 Ohms
• Magnet Mass: 25oz (720g)
• Net Mass: Approximately 2.1Kg
• Mounting Depth: 2.8" (71mm)
• Package Dimensions: Approx. 8 x 8 x 5 inches
• Weight: Approx. 5lbs

• 6" x 8" 2-Way Car Speakers
• Power Handling:
•    - Peak: 500 watts per pair / 250 watts each
•    - RMS: 60 watts per pair / 30 watts each
• Polypropylene midwoofer
• Treated cloth surround
• 1" Balanced dome tweeter
• Ferrite magnet
• Top-mount Depth: 2-3/8"
• Cutout Dimensions: 5-1/16" x 7-3/8"
• 4 ohms impedance
• Frequency Response: 45 - 22000 Hz
• Sensitivity: 90dB
• Package Dimensions: Approx. 15 x 9 x 5 inches
• Weight: 4lbs / 64oz

• Type: Amplifier
• Brand: Hifonics
• Series: ZEUS THETA
• Category: Mobile
• Color: Silver
• Compatible Vehicles: Universal
• Amp Class: Class D
• Amp Total Channels: 1
• Amp Max Power (watts): 2200
• Amp Power @ 1 Ohm (ch x watts): 1 x 2200
• Amp Power @ 2 Ohms (ch x watts): 1 x 1100
• Amp Power @ 4 Ohms (ch x watts): 1 x 550
• Amp Crossover: Variable Electronic 12dB Per Octave
• Amp Variable Low Pass Crossover 12dB per Octave: 40Hz-300Hz
• Amp Tone Control / Parametric EQ: Built-in Bass Control
• Amp Bass Boost: 0-9dB
• Amp Subsonic Filter: 10Hz-40Hz
• Amp Variable Voltage: 0.2-6V
• Amp Frequency Response: 10Hz-500Hz
• Amp Total Harmonic Distortion (THD): < 0.1%
• Amp Speaker Level Audio Inputs: Yes
• Amp Power Terminal 12v/GND: 4 AWG
• Amp Speaker Terminal Wire Gauge: 12 AWG
• Amp Fusing: External 125A
• Item Weight (lbs): 5.51
• Item Length (in): 10.9
• Item Width (in): 5.75
• Item Height (in): 2.5
• Weight: 6.61 lbs
• Dimensions: 16.46 × 7.68 × 4.33 in

• Wiring harness for select Harley Davidson motorcycles to add a new amplifier.
• Includes everything needed to install a Maestro amplifier replacement module.
• Speaker harness makes it easy to connect speakers to the new amplifier.
• This solution will reprogram the factory radio to provide a flat audio signal without the need for a scan tool or dealer visit.
• Product Dimensions: 4.7 x 7.8 x 3.2 inches
• Item Weight: 0.56lbs / 9oz

• Electra Glide All Radio Trims 2014-2021
• Road Glide All Radio Trims 2014-2021
• Street Glide All Radio Trims2014-2021
• TRI Glide All Radio Trims 2014-2021
• Ultra Limited All Radio Trims 2014-2021

Nemesis Audios are car electronic products designed for superior performance. The NA-1500X4D is a 4 channel 1500 watt max power car amp.

BRAND NEW

NEMESIS AUDIO NA-1500X4D

1500 Watts Max Power 4 Channel Car Audio Amplifier

Key Features:
 

• RMS / MAX @ 4Ohm: 4x100W / 4x200W
• RMS / MAX @ 2Ohm: 4x130W / 4x260W
• Input Level – 0.2V – 6V
• Frequency Response: 20Hz – 20kHz
• LPF: 40Hz – 180Hz
• Bass Boost Level: 0-15dB
• THD at 4 Ohm load 30% Rated Power: <0.2% Signal to Noise Ratio: >80dB
• Best Effeciency: >85%
• Minimum Load: 2 Ohm
• Dimensions (LxWxH): 241 x 185 x 58mm
• Package Dimensions: Approx. 11" L x 9" W x 3" H 
• Weight: Approx. 4 Lbs / 64 oz

• Perfect for use with AmpPRO AP4-TY11 or AP4-TY12
• EIA standard color-coded wires make identifying factory speaker wires and phase easier
• APH-TY02 harness eliminates having to run new speaker wire throughout the car
• 18” Harness length
• Package Dimensions: 10 x 5 x 0.2 Inches
• Weight: 0.5 Lbs

• Avalon - 2013-2018
• Camry- 2012-2018
• Highlander- 2014-2017
• Land Cruiser- 2013-2017
• Prius- 2012-2017
• Rav4- 2013-2017
• Tundra- 2007-2013

• CT 200H- 2014-2017
• ES 300H- 2013-2014
• ES 350- 2013-2018
• GS 350- 2013-2017
• GS 450H- 2013-2017
• GX 460- 2014-2017
• IS 200T- 2016-2017
• IS 250- 2014-2015
• IS 300- 2016-2017
• NX 200T- 2015-2017
• NX 300H- 2015-2017
• RC 200T- 2016-2017
• RC 300- 2016-2017
• RC 350- 2015-2017
• RX 350- 2013-2017

• Bass maximizer and bass restoration processor
• Accurately recreates and injects low frequency information back into a signal path
• Efficient bass equalization circuit
• Gold plated contacts for optimal signal transfer
• Maximum bass control
• Includes a dash mount remote control
• Subsonic filter and bass level control
• Lighted bass restoration display
• Output level: 13.5v
• Frequency response: 10-10000Hz output
• Input noise rejection: 60dB

• Maximum Input Level: 15V RMS
• Maximum Output Level: 13.5V Peak
• Frequency Response: 10-100,000 Hz
• T.H.D Rating: 0.002%
• Signal-to-Noise Ratio: 132 dB
• Balanced Input Noise Rejection: >60 dB
• Input Impedance: 10,000 ohms
• Output Impedance: 150 ohms
• Power Draw: 150 mA
• Recommended Fuse Rating: 1 Amp
• Package Dimensions: Approx. 13.2 x 2.6 x 7.8 inches
• Package Weight: Approx. 4.1 pounds / 65.6 Oz

• Designed to generate load and stabilize signal from amplified factory system to ensure the best possible audio.
• It comes in pairs and can be easily connected to your AudioControl Factory System Upgrade product with the pre-wired connectors.
• Installed between the factory speaker outputs and your line output converter or speaker level inputs on your amp or processor.
• Comes pre-wired with EIA standard wire colors for front and rear connections.
• Ideal for OEM premium amplified Dodge, Chrysler, Jeep, Maserati sound systems.

• Maximum Input Voltage: 25 Vrms (150 watts)
• Input Impedance: 60 Ohms
• In The Box: One pair of pre-wired AC-LGD 60s
• Dimensions (without wires/connectors): 2.3″L x 1.0″W x .06″H
• Dimensions (with wires/connectors): 9.75″L x 1.0″D x .06″H
• Weight (single LGD): 1.4oz (39g)
• Package Dimensions: Approx. 11 x 11 x 1 Inches
• Package Weight: Approx. 0.2 Lbs

• Planet Audio PL2400.4
• Class-A/B FullRange 2-Ohm Stable 4-Channel Amplifier
• RMS Power Rating:
•    - 4 ohms: 224 watts x 4 chan.
•    - 2 ohms: 300 watts x 4 chan.
•    - Bridged, 4 ohms: 600 watts x 2 chan.
• Total power output: 2400 watts
• Pulse Width Modulated MOSFET power supply
• Wired remote bass level control included
• LED power (green) and protect (red) indicators
• 4/3/2 channel operation
• Soft start turn-on
• Speaker-level (high-level) inputs
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Black anodized heatsink
• Frequency Response: 9Hz - 50kHz
• Fixed high-pass filter: 200Hz
• Variable low-pass filter: 35 Hz to 160 Hz
• Variable Bass Boost: 0 to +18 dB bass boost
• Fuse Rating: 35 A x 2
• 4 gauge power and ground wiring is recommended for installation.
• Dimensions: 7"W x 15.875"L x 2.26"H
• Weight: 8.6 Lbs

• Allows installation of new iDatalink-compatible receiver in select Hyundai and Kia vehicles (also requires the Maestro ADS-MRR module)
• Retains the use of your steering wheel audio controls in select vehicles
• Retains factory backup camera and front camera (receiver must have a second camera input)
• Displays engine performance data on touchscreen
• Package Dimensions: Approx. 6 x 4 x 1 Inches
• Weight: Approx. 1lb

• 6.5 Inch 2-way speaker
• 200W MAX power
• RMS 25W
• IMPP Cone
• 4ohm coil
• Shallow basket for versatile installation

• Behind The License Plate Rearview Camera with LED's
• CMOS Sensor with HD Vision
• 600 TVL Horizaontal Resolution
• Excellent Auto White Balance
• 720x480 Pixels
• 170° Wide Viewing Angle
• Waterproof (IP67)
• Reverse/Non-Reverse Image Selectable
• Parking Line On/Off Selectable
• LED Light On/Off Selectable
• Excellent Night Vision Picture Quality
• 22 ft RCA Cable Included
• Package Dimensions: Approx. 9 x 4 x 2 inches
• Weight: 1lb

• Universal 'all-in-one' integration cartridge
• Web-programmable data immobilizer bypass and doorlock integration for over 4000 vehicle models from 1997 to date including exclusive KLON firmware applications
• Inserts directly in APSFC remote start, vehicle security, and convenience products for seamless integration
• Package Dimensions: 7 x 4.5 x 1.5 Inches
• Weight: 0.3 Lbs

• Hifonics ZG-1200.1D Class D Amplifier
• Power Rating:
•    - 4 Ohms: 300 Watts x 1
•    - 2 Ohms: 600 Watts x 1
•    - 1 Ohms: 1200 Watts x 1
• Variable Electronic 12dB Per Octave
• Variable Low Pass Crossover 12dB per Octave: 40 - 300Hz
• Tone Control/Parametric EQ: Built-in bass control
• Bass Bosst: 0 - 9dB
• Subsonic Filter: 10 - 40Hz
• Phase Shift: 0-180 Degrees
• Variable Voltage: .2 to 6V
• Frequency Response: 10Hz-500Hz
• Total Harmonic Distortion: <0.10%
• Speaker Level Audio Inputs
• Bass Remote Included
• Angled Terminals for Ease of Access
• Aluminum Heat Sink
• PWM MOSFET Power Supply
• Electronic Equalizer
• Onboard Electronic Crossover
• High Level Input
• Nickel Plated RCA Inputs
• 4 AWG Power Terminals
• 12 AWG Speaker Terminals
• Fuse Rating: 60A
• Package Dimension: Approx. 12 x 10 x 2.4 inches
• Package Weight: Approx. 8.7lbs/139.2oz