4-Channel

Nemesis Audios are car electronic products designed for superior performance. The NA-1500X4D is a 4 channel 1500 watt max power car amp.

BRAND NEW

NEMESIS AUDIO NA-1500X4D

1500 Watts Max Power 4 Channel Car Audio Amplifier

Key Features:
 

• RMS / MAX @ 4Ohm: 4x100W / 4x200W
• RMS / MAX @ 2Ohm: 4x130W / 4x260W
• Input Level – 0.2V – 6V
• Frequency Response: 20Hz – 20kHz
• LPF: 40Hz – 180Hz
• Bass Boost Level: 0-15dB
• THD at 4 Ohm load 30% Rated Power: <0.2% Signal to Noise Ratio: >80dB
• Best Effeciency: >85%
• Minimum Load: 2 Ohm
• Dimensions (LxWxH): 241 x 185 x 58mm
• Package Dimensions: Approx. 11" L x 9" W x 3" H 
• Weight: Approx. 4 Lbs / 64 oz

• OPERATION CLASS: Class D
• NUMBER OF CHANNELS: 04
• MAXIMUM POWER:
•  - @ 12.6 VDC - 2 OHMS: 440W RMS (4 x 110W RMS)
•  - @ 12.6 VDC - 4 OHMS: 276W RMS (4 x 69W RMS)
•  - 2 Bridgeable Channels: @12.6 VDC - 4 OHMS: 440W RMS (2 x 220W RMS)
• INPUT SENSITIVITY: 250mV
• SIGNAL TO NOISE RATIO: >89dB
• FREQUENCY RESPONSE: 8Hz to 26KHz(-3dB)
• CROSSOVER HIGH PASS (HPF): 90Hz (-12dB/8th) Fixed
• CROSSOVER LOW PASS (LPF): 90Hz (-12dB/8th) Fixed
• INPUT IMPEDANCE: 18K ohms
• OUTPUT IMPEDANCE: 2 ohms
• PROTECTION SYSTEM: Output Short Circuit
• MIN. SUPPLY VOLTAGE: 8VDC
• MAXIMUM POWER SUPPLY VOLTAGE: 16VDC
• CONSUMPTION AT REST: 0.8A
• MAXIMUM MUSIC CONSUMPTION: @12.6 VDC: 23.5A
• MAXIMUM CONSUMPTION IN SINUSOIDAL SIGNAL: 47A
• DIMENSIONS (WXHXD): 6.30" x 1.73" x 5.71" (160 x 44 x 145mm)
• WEIGHT: 1.32lb (0,60kg)

BRAND NEW

TARAMP'S TS 400X4

400 Watts Max Power 2 Ohms 4 Channel Full Range Car Audio Amplifier

Key Features:

Number of Channels: 04

Maximum Power:

@ 13.8 VDC - 2 OHMS - 400 W RMS (4 x 100W RMS)

@ 13.8 VDC-4 OHMS - 252 W RMS (4 x 63W RMS)

Bridged @ 13.8 VDC - 4 OHMS - 400W RMS (2 x 200W RMS)

Input Sensitivity: 200mV (Vol=Max)

Signal to Noise Ratio: > 90dB

Frequency Response: (Full Range): 18Hz to 30kHz (-1dB)

High Pass Crossover (HPF): 90Hz (-12dB / 8th)

Low Pass Crossover (LPF): 90Hz (-12dB / 8th)

Input Impedance: 22K OHMS

Thermal Protection System and Short Output

Minimum Supply Voltage: 8 VDC

Maximum Supply Voltage: 16 VDC

Standby Power: 0.8 Amp.

Maximum Musical Power: @ 13.8VDC: 16.5 Amp.

Maximum Consumption in Sine Signal: (1kHz) 13.8VDC: 33 Amp.

Product Dimensions: Approx. 6.3"L x 4.13"W x 1.97"H 

Package Weight: Approx.  1.58lbs / 25.28oz

BRAND NEW

SOUNDSTREAM TXP4-3500D 

3500 Watts Max 4-Channel 4 Ohm Full Range Car Audio Amplifier

Key Features:
 

• 1-ohm Minimum Impedance Monoblock Operation
• See Through Smoked Plexy Top
• LED Accent Lighting Illuminates Circuit Board, for Your Viewing Pleasure
• Silicone Steel Alloy Core Power Supply Transformers, & Flux Capacitors
• Military Grade SMT PCB Maintains Dynamic Performance
• Direct Short, Thermal, & Overload Circuits Protect Amplifier
• 200mV-6V High Level or Low-Level RCA Input & Output
• Variable 12dB High Pass, Low Pass, & Subsonic Crossovers
• Dual Fans
• 0G Power and Ground Connections
• MAX Power 3,500 Watts
• RMS Power 4Ohm 120W x 4
• RMS Power 2Ohm 235 x 4
• RMS Power 1Ohm 375 x 4
• 700W x 2 at 2 Ohm Bridged
• Remote Gain Control Included
• Package Dimensions: Aprrox. 8.3"L x 7.3"W x 2.8"H
• Package Weight: Approx. 6.2 lbs / 99.2 oz.

Brand New

Soundstream ST4.1000D

1000 Watts 4 Channel Stealth Series Class D FullRange Amplifier

Key Features:

Soundstream ST4.1000D 1000W 4 Channel Stealth Series Class D FullRange Amplifier

Stealth Series Class D Car FullRange Amplifier

Pulse Width Modulated MOSFET Power Supply

LED Power (Green) And Protect (Red) Indicators

Military Grade SMT PCB Maintains Dynamic Performance

Preamp And Speaker-Level Inputs

3-Way Protection Circuitry (Thermal, Overload, And Speaker Short Protection)

Specification:

RMS Power Rating:

4 Ohms: 90 Watts X 4 Channel

2 Ohms: 125 Watts X 4 Channel

Fuse Rating: 30A X 1

THD: 0.05%

Signal To Noise Ratio: 70dB

200mV-6V High Level Or Low Level RCA Input

Frequency Response: 40 - 30000 Hz

Variable 35-250Hz Low Pass Crossover

Item Weight: 2.1 pounds/33.6 Ounces

Product Dimensions: 7.5 x 3.88 x 1.5 inches

Brand New

Soundstorm EV400.4

400 Watt RMS 4 Channel Car Power Amplifier Amp Mosfet SSL

Key Features:

Evolution Series 4-Channel Class AB Car Amplifier

Power Rating:

4 ohms: 50 watts x 4 chan.

2 ohms: 100 watts x 4 chan.

4 channel operation

Soft turn on circuit

Variable high-pass filter (200 Hz fixed, 24 dB/octave)

Variable low-pass filter (120 Hz fixed, 24 dB/octave)

4 gauge power and ground wiring is required for installation

Thermal overload and speaker short protection

Dimensions: 7.5"W x 9"L x 1.75"H

Item Weight: 3.5 Pounds/56 Ounces

BRAND NEW

SOUNDSTREAM AR4.1800

1800 Watts Max 2-Ohm Stable 4-Channel Car Audio Amplifier


Key Features: 
 

• Soundstream Arachnid Series AR4.1800 Amplifier
• Class-A/B Full Range 2-Ohm Stable 4-Channel Amplifier
• RMS Power Rating:
• 4 ohms: 80 watts x 4 chan.
• 2 ohms: 130 watts x chan.
• 1 ohm: ------------N/A------------
• Bridged, 4 ohms: 260 watts x 2 chan.
• Total power output: 1,800 watts
• Military-Grade PCB with Pulse Width Modulated MOSFET power supply
• LED power (green) and protect (red) indicators
• 4/2 or Mono channel operation
• Speaker-level (high-level) inputs
• Low-level pre-amp RCA outputs
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Dual speaker terminals simplify the hookup of multiple speakers
• Heavy duty aluminum alloy heat-sink
• Input sensitivity: 200 - 6V
• Frequency Response: 20 - 20,000 Hz
• Total Harmonic Distortion (THD): <1%
• Signal to Noise Ration: 95 dB
• Variable high-pass filter: 120 - 3,000 Hz
• Variable low-pass filter: 50 - 2,500 Hz
• Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz
• Fuse Rating: 35 A x 2
• Package Dimensions: Approx. 15.75" L x 8.5" W x 2" H 
• Package Weight: Approx. 3.9 lbs / 62.4 oz.

• Evolution Series 4-Channel Class AB Car Amplifier
• RMS Power Rating:
•    - 4 ohms: 38 watts x 4 chan.
•    - 2 ohms: 75 watts x 4 chan.
• Max Power Rating: 4 ohms: 100 watts x 4 chan.
• MOSFET power supply
• LED power (green) indicator
• Soft Start Turn-on
• 4/3/2 channel operation
• Speaker-level (high-level) inputs
• 3-Way System Protection circuitry (thermal, overload, and speaker short protection)
• Heavy duty aluminum alloy heatsink for extreme heat dissipation
• Chrome-plated RCA level inputs
• Nickel-plated screw terminals
• Fixed high-pass filter: 200 Hz
• Fixed low-pass filter: 120 Hz
• Frequency response: 12-22,000 Hz
• 8-gauge power and ground wiring is required for installation.
• Dimensions: Approx. 9 x 6.9 x 1.75 Inches
• Weight: 3.7 Lbs

BRAND NEW 

SOUNDSTREAM ST4.1200D 

1200W Max 2 Ohm 4 Channel Class D Car Audio Amplifier

Key Features:
 

• Soundstream Stealth Series ST4.1200D
• Class-D Full Range 2-Ohm Stable 4-Channel Amplifier
• Small footprint, big power for your car, UTV, and all kinds of other applications
• RMS Power Rating:
• 4 ohms: 100 watts x 4 chan.
• 2 ohms: 150 watts x 4 chan.
• 1 ohm: ------------N/A------------
• Bridged, 4 ohms: 300 watts x 2 chan.
• Total power output: 1,200watts
• Pulse Width Modulated MOSFET power supply
• LED power (green) and protect (red) indicators
• Soft start turn-on
• 4/2 channel operation
• Speaker-level (high-level) inputs
• Preamp RCA outputs to daisy chain multiple amps
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Dual speaker terminals simplify the hookup of multiple speakers
• Heavy duty aluminum alloy heat-sink
• Input sensitivity:
• High level: 200mV-12V
• Variable high-pass filter: 50 - 500 Hz, 12 dB/octave
• Variable low-pass filter: 50 - 500 Hz, 12 dB/octave
• Fuse Rating: 20 A x 2
• Power and ground wire included in wiring harness with Molex connector
• Product Dimensions: Approx. 7.75" L x 3" W x 1.5"H
• Product Weight: Approx. 1.9 lbs. / 30.4 oz

• SSL Charge CG1202
• Class A/B Full Range 2-Ohm 2-Channel Amplifier
• RMS Power Rating:
• 4 ohms: 150 watts x 4 chan.
• 2 ohms: 300 watts x 4 chan.
• Bridged, 4 ohms: 600 watts x 2 chan.
• 1 ohm: ------------N/A------------
• Total power output: 1600 watts
• CEA-2006 Compliant Amplifier
• High and Low Level Inputs
• Include Remote Subwoofer Control
• MOSFET Power Supply
• 4/3/2 channel operation
• Frequency Response: 9 - 50000 Hz
• Total Harmonic Distortion (THD): 0.010%
• Signal to Noise Ratio: 105 dB
• Variable low-pass filter: 50 - 250 Hz, 24 dB/octave
• Variable Bass Boost: 0 to +18 dB bass boost at 50 Hz
• Product Dimensions: Approx.  6.5"W x 13.7"L x 2.5"H
• Product Weight: Approx. 6.65 lbs. / 106.40 oz.

• 500W RMS Stealth Series Class D 4 Channel Amplifier
• RMS Power Rating:
•    - 4 ohms: 90 W x 4
•    - 2 ohms: 125 W x 4
•    - 4 ohm bridged: 250 W x 2
• Dynamic Power: 1000 W
• Hybrid Aluminum Alloy Heatsink for Optimum Dissipation
• 2-ohm Stereo & 4-ohm Bridged Full Range Operation
• 2-ohm Minimum Impedance Monoblock Operation
• MOSFET Power Supply w/ Audiophile Grade IRTM Transistors
• Military Grade SMT PCB Maintains Dynamic Performance
• Direct Short, Thermal, & Overload Circuits Protect Ampllifier
• 200mV-12V High Level or Low Level RCA Input
• Quick Disconnect RCA/High Level Wire Harness
• Quick Disconnect Power and Speaker Output Harness
• Variable 12dB High Pass, Low Pass, & Subsonic Crossovers
• Package Dimensions: ‎7.5 x 3.88 x 1.5 inches
• Weight: 2.1 pounds / 33.6 ounces

• High-level input capable with Auto Turn-On circuit
• Features C.L.E.A.N. Set-up
• 12dB/octave Butterworth crossover
• On-board Punch EQ with +18dB boost @ 45Hz
• Muted turn on
• Cast aluminum heatsink
• Stealth top-mounted control panel
• Short circuit protection
• Over-current protection
• Marine-grade stainless steel hardware
• Marine-grade two-part epoxy coating on circuit boards

• Number of Channels: 4
• Total Power (Sum of Rated Power): 400 Watts
• Rated Power (RMS Continuous Power):
•  - 50 Watts x 4 @ 4-Ohm
•  - 100 Watts x 4 @ 2-Ohm
•  - 200 Watts x 2 @ 4-Ohm Bridged
• Dynamic Power (PVC/PowerCube®):
•  - 82 Watts x 4 @ 4-Ohm
•  - 137 Watts x 4 @ 2-Ohm
•  - 266 Watts x 2 @ 4-Ohm Bridged
• Bridgeable: Yes
• Frequency Response: 20Hz to 20kHz +/- 1.0dB
• Input Sensitivity: 150 mV - 12 V
• Circuit Topology Class: Class A/B
• Efficiency (average): 67% @ 4-Ohm
• Total Harmonic Distortion (THD+Noise)
•  - 4-Ohm: <1.0%
•  - 2-Ohm: <1.0%
• Signal Input: Hi/Low level: 2 RCA pair
• Signal Output: -
• Tone Controls:
•  - Front Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
•  - Front Punch EQ2 Treble: 0dB to +12dB @ 12.5kHz
•  - Rear Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
•  - Rear Punch EQ2 Treble: 0dB to +12dB @ 12.5kHz
•  - Function depends upon LP/AP/HP switch position
•  Crossover Controls:
•  - Front High-Pass/Low-Pass (HP/LP): 50Hz-250Hz @ 12dB/octave Butterworth
•  - Rear High-Pass/Low-Pass (HP/LP): 50Hz-250Hz @ 12dB/octave Butterworth
•  - All-Pass: Yes
• Remote Controls: -
• Visual Indicators:
•  - Power/Protect/Thermal LED
•  - Input Clip LED3
•  - Output Clip LED1,2,3
•  - LED Color Legend:
•  - 1BLUE: <0.5% THD
•  - 2VIOLET: 1% THD
•  - 3RED: 10%+ THD
• Power Wire Gauge: 8 AWG to 4 AWG
• Power Input Connector: Captive C-Clamp
• Speaker Wire Gauge: 8 AWG to 18 AWG
• Speaker Output Connector: Captive C-Clamp
• Cooling: Convection
• Heatsink: -
• Operating Voltage: 9 - 16 VDC
• Recommended Fuse (not included): 60 A
• Average Current Draw (13.8V Music): 30 A
• Max. Current Draw (13.8V Sinewave): 60 A
• Suggested Alternator: 75 A
• Dimensions (H x W x D): 2.38 x 7.76 x 11.03 (in) / 6.05 x 19.71 x 28.02 (cm)
• Shipping Weight: 10.8 Lbs. (4.89 Kg.)

Brand New

Power Acoustik BAMF4-1800

1800 Watts Max 4-Channel 2-Ohm Class AB Car Audio Amplifier

Key Features:

Die-Cast Aluminum Alloy Heatsink for Optimum Dissipation

2-ohm Stereo & 4-ohm Bridged Full Range Operation

MOSFET Power Supply w/ Audiophile Grade IRTM Transistors

Military Grade SMT PCB Maintains Dynamic Performance

Direct Short, Thermal, & Overload Circuits Protect Amplifier

Easy DIY Install Single Sided Terminals & Controls

Angled Wire Terminals Secure Wire Connections

Chassis Integrated Aluminum Mounting Points

Variable 12dB High Pass, Low Pass, & Subsonic Crossovers

200mV-6V Low Level RCA Inputs

4g Power Wire & 8g Speaker Wire Outputs

12dB Bass Boost Increases Low Octave Harmonics

Specifications:

BAMF Amplifier: BAMF4-1800

MAX Power: 1,800 Watts

RMS @ 4Ω Bridged ,14.4V: 2 x 450

RMS @ 2Ω, 14.4V: 4 x 225

RMS @ 4Ω, 14.4V: 4 x 110

Dimensions (2.25"H x 8.5"W): 13.25"

Package Dimensions: Approx. 16 x 11 x 4 inches

Weight: 9.2lbs/147.2 Ounces

• Power Acoustik Caliber CB4-1200
• Class-A/B Full Range 2-Ohm Stable 4-Channel Amplifier
• RMS Power Rating:
•    - 4 ohms: 120 watts x 4 chan.
•    - 2 ohms: 150 watts x 4 chan.
•    - Bridged, 4 ohms: 300 watts x 2 chan.
• Total power output: 1,200 watts
• Pulse Width Modulated MOSFET power supply
• Wired remote bass level control included
• LED power (green) and protect (red) indicators
• Soft start turn-on
• 4/3/2 channel operation
• Speaker-level (high-level) inputs
• Preamp RCA outputs to daisy chain multiple amps
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Dual speaker terminals simplify the hookup of multiple speakers
• Heavy duty aluminum alloy heat-sink
• Input sensitivity: High level: 200mV-6V
• Frequency Response: 15 - 20,000 Hz
• Total Harmonic Distortion (THD): .05%
• Signal to Noise Ratio: 105 dB
• Variable high-pass filter: 120 - 3,000 Hz, 12 dB/octave
• Variable low-pass filter: 50 - 1,500 Hz, 12 dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz
• Fuse Rating: 20 A x 2
• 4 gauge power and ground wiring is recommended for installation.
• Package Dimensions: Approx. 13"L x 9.5"W x 2"H 
• Package Weight: Approx.  8 lbs / 128 oz​

BRAND NEW 

POWER ACOUSTIK BAMF4-1200

1200 Watts Max 2-Ohm Stable 4-Channel Bridgeable Car Audio Amplifier

Key Features:

• Power Handling:
• 
  
  • 75W x 4 at 4-Ohm Stereo
  • 150W x 4 at 2-Ohm Stereo
  • 300W x 2 at 4-Ohm Bridged
• 1,200W Max Power
• 2-Ohm Stereo and 4-Ohm Bridged Full Range Amplifier
• Die-Cast Aluminum Alloy Heatsing for Optimum Dissipation
• MOSFET Power SUpply with Audiophile Grade IR Transistors
• Military Grade SMT PCB Maintains Dynamic Performance
• Direct Short, Thermal and Overload Circuits Protect Amplifier
• Easy DIY Install Single Sided Terminals and Controls
• Angled Wire Terminals Secure Wire Connections
• Chassis Integrated Aluminum Mounting Points
• Variable 12dB High Pass and Low Pass Crossovers
• 200mV-6V Low Level RCA Inputs
• 4g Power Wire and 8g Speaker Wire Outputs
• 12dB Bass Boost Increases Low Octave Harmonics
• Total Harmonic Distortion: <0.02%
• Frequency Response: 10-30kHz
• Signal-to-Noise Ratio: 105dB
• Input Sensitivity: 200mV-6V
• Variable 50-500Hz 12dB High Pass Crossover
• Variable 50-500Hz 12dB Low Pass Crossover
• Variable 0-12dB 45Hz Bass Boost
• Package Dimensions: Approx. 14.25"L x 10.75"W x 4"H
• Weight: Approx. 7.8 lbs / 124.8 oz

• 4-Channel RAZOR Series Full Range Class D Car Amplifier
• RMS Power Rating:
• -4 ohms: 160 watts x 4 chan.
• -2 ohms: 250 watts x 4 chan.
• Bridged, 4 ohms: 500 x 2 chan.
• Max power output: 2000 watts
• Pulse Width Modulated MOSFET power supply
• LED power (green) and protect (red) indicators
• Soft start turn-on
• Mono channel operation
• Speaker-level (high-level) inputs
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• 4.75" Wide Chassis Heavy duty aluminum alloy heat-sink for extreme heat dissipation
• Bridgeable Amplifier
• Nickel-plated RCA level inputs
• Nickel-plated screw terminals
• Input Sensitivity: 0.25V to 6V
• 80Hz HP Crossover @ 12dB
• 80Hz LP Crossover @ 12dB
• 4 gauge power and ground wiring is required for installation. Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier.
• Fuse: 30A x 2
• Dimensions: 11.1 x 4.75 x 1.33 inches
• Weight: 5lbs / 80oz

• Max Music Peak Power: 2500W
• Total Musical Watts: 1250W
• Stereo 2 Ohm Watts: 750W
• Frequency Response: 10Hz-30KHz(-3dB)
• Signal noise Ratio: 90dB
• Input Impedance: 22k ohm
• Input sensitivity: 200mV-6V
• THD: <0.1%
• Hi Pass Frequency: 50Hz-1.2KHz
• Low Pass Frequency: 40Hz-250Hz
• Bass Boost: 0-3-6dB
• Supply voltage: 10~16V DC
• Power and Protection LED Indicators
• Soft Turn-on/ Turn-off
• Dimensions(mm): 312 x 185 x 62