5-Channel and up

• Power Acoustik BAMF Series BAMF5-2500
• Class-A/B 2-Ohm Stable 5-Channel Amplifier
• RMS Power Rating:
•    - 4 ohms: 50 watts x 4 chan. + 850 x 1 chan.
•    - 2 ohms: 100 watts x 4 chan. + 850 x 1 chan.
•    - 4 ohm: 200 watts x 2 chan. + 850 x 1 chan.
• Total power output: 2500 watts
• Pulse Width Modulated MOSFET power supply with Audiophile Grade IRTM Transistors
• Wired remote bass level control included
• LED power (green) and protect (red) indicators
• Soft start turn-on
• Preamp RCA outputs to daisy chain multiple amps
• 3-way protection circuitry (thermal, overload, and speaker short protection)
• Angled Wire Terminals for Secure Wire Connections
• Die-Cast Aluminum Alloy Heatsink for Optimum Dissipation
• Variable low-pass filter: 50 - 500 Hz, 12 dB/octave
• Variable high-pass filter: 50 - 500 Hz, 12 dB/octave
• Variable Bass Boost: 0 to +12 dB bass boost
• 4 gauge power and ground wiring is recommended for installation.
• Amplifier Dimensions: 2.25″H x 8.5″W x 17″L
• Weight: 11.7 lbs / 187.2

• Anarchy Series 5-Channel Car Amplifier
• RMS Power Rating:
• 210 watts x 4 channels + 420 watts x 1 channel
• 420 watts x 2 channels + 420 watts x 1 channel
• Max power output:
• 300 watts x 4 channels + 600 watts x 1 channel
• Pulse width modulated MOSFET power supply
• Convenient remote subwoofer control
• LED power (green) and protect (red) indicators
• Variable Bass Boost 0 to +18 dB
• Bridgeable Tri-mode operations
• Chrome-plated connections enhance durability
• Variable high and low pass crossovers
• Illuminated logo
• 3-Way System Protection circuitry (thermal, overload, and speaker short protection)
• Heavy duty aluminum alloy heatsink for extreme heat dissipation
• Low level high inputs
• Nickel-plated contacts
• Heavy-duty set-screw terminals
• Input sensitivity:
• Low level: 100mV-2V
• High level: 2V-8V
• Variable high-pass filter (50-500 Hz, 24 dB/octave)
• Variable low-pass filter (45-90 Hz, 24 dB/octave)
• Damping factor: >125
• Signal-to-Noise Ratio: 102 dB
• Frequency response: 20-20,000 Hz
• Dimensions: 19-15/16"L x 10"W x 2-3/16"H

• Number of Channels: 5 / 4 / 3 / 2
• Max. Wattage (4 Ω): 150W x 4 (A/B), 700W (SUB)
• Max. Wattage (2 Ω): 200W x 4 (A/B), 1200W (SUB)
• Max. Wattage Bridged (4 Ω): 400 W x 2 (A & B)
• Wattage RMS (4 Ω <= 1%THD+N): 75W x 4 (A/B), 350W (SUB)
• Wattage RMS (2 Ω <= 1%THD+N): 100W x4 (A/B), 600W (SUB)
• Wattage RMS Bridged (4 Ω): 200 W x 2 (A & B)
• Frequency Response: A/B CH: 10Hz ~ 50kHz (+0dB, -3dB) / SUB CH: 10Hz ~ 500Hz (+0dB, -3dB)
• Total Harmonic Distortion: (1kHz, 4 Ω)
• A/B CH: <0.05% (1kHz) / SUB CH: <0.05% (100Hz)
• Signal-to-Noise Ratio (IHF-A Weighted): > 94 dB
• Dimensions (W x H x D): 12.4 x 7.8 x 2.4 inches
• Weight: Approx. 7lbs

• Number of Channels: 5CH
• Max Output @ 14.4VDC – 1OHM: 4 x 200W + 1 x 1,000W RMS
• Max Output @ 14.4 VDC – 2OHM: 4 x 130W + 1 x 750W RMS
• Max Output @ 14.4 VDC – 4OHM: 4 x 75W + 1 x 450W RMS
• Input Sensitivity: 0.2-6V
• Signal to Noise Ratio: 100dB
• Frequency Response: 10HZ-20KHZ (-3dB)
• Supply Voltage: 16V DC
• High Pass Filter 15 to 1 Khz
• Low Pass Filter: 80Hz to Full
• Bass Boost: 0-12db (50Hz)
• Thermal Management: Smart Cooling System (Fan powered by Tem or Audio Input)
• Impedance: 56k Ohms
• Min. Supply Voltage: 9V
• Max. Supply Voltage: 16V

• RMS Power @ 4Ohm: 85W x 4 & 275W X1
• MAX POWER @ 4OHM: 170W x 4 & 550W X1
• RMS Power @ 2Ohm: 125 x 4 & 500W x 1
• MAX Power @ 2Ohm: 200W x 4 & 800W x 1
• Input Level – 0.2V – 6V
• Frequency Response: 20Hz – 20KHz
• LPF: 40Hz – 180Hz
• Bass Boost Level: NA
• THD at 4 Ohm load 30% Rated Power: <0.5% Signal to Noise Ratio: >80dB
• Best Effeciency: >85%
• Dimensions (LxWxH): 306 x 185 x 58mm

Brand New

Massive Audio PX6

130 Watts RMS X 6 @ 4 Ohm 6 Channel Amplifier

Key Features:

Extreme Power in a Small Footprint

Clip LED Indicators For All 6 Channels

2 / 4 / 6 Channel Input Selector

Multiple Channel Selector for HPF / LPF

Low Distortion Full Band Width for Sound Quality Tuning

Mil Spec Double Sided PCB design with SMD parts

Tiffany Style Nickel plated RCA's 

Built-in noise reduction circuitry

Full MOSFET with High Grade switching devices

Built-in Auto Sensing turn on function with LED Indicator (Hi-Inputs)

12V Remote Output for External Devices (Hi-Inputs)

0~12dB Variable Bass Boost for Channels 5/6

Next Generation Advanced 5 Way Protection Circuitry

Illuminated Logo

Designed and Engineered in U.S.A.

CTA 2006 Standard Compliant 

Product weight: 7.04 pounds/112.64 Ounces

Package dimensions: 14.8 x 7.6 x 3.7 inches

• Planet Audio Wireless FM Modulator
• Input Connection Type: RCA Stereo Composite Cables
• Allows you to play audio from an auxiliary source through your existing mobile audio system using a selected frequency on your head unit
• Dimensions: 5"L x 3-3/4"W x 1-1/4"H
• Weight: 0.5lbs

• Six Input and Output Channels
• 6 Speaker Level Inputs - Can Accept 400 Watt Signals!
• Signal sensing inputs
• Internal Channel Summing
• AutoMode inputs
• Level matching controls
• 12 volt trigger output
• Line Output Converter: A device for converting a powered (or amplified) signal into a pre-amp line level (or non-powered) signal
• Input for optional subwoofer level control: AudioControl ACR-1
• Weight: 3.5 lbs
• Size: 8.00" W x 6.00" D x 1.20" H

• Maximum speaker-level input: 400 watts @ 4 ohms
• Maximum output level: 9.5Vrms
• Output gain: ±12 dB
• Frequency response: 10Hz-22kHz
• Total harmonic distortion: 0.01%
• Input Impedance: 20 Kohms
• Power supply: High headroom PWM switching
• Power draw: 200mA
• Recommended fuse rating: 1 Amp
• Remote Trigger Ouput Current: 1 Amp